2010 Chrysler Delta Concept Cars at the Detroit Auto Show ready for production

As you know, Fiat-Chrysler alliance will produce a series of models developed by a manufacturer that will be marketed with the logo of other brands belonging to the consortium. To illustrate some of the changes that took place in the Fiat-Chrysler alliance, the Americans from Chrysler unveiled a Lancia Delta with a Chrysler logo. The compact Delta was present at the Detroit Auto Show with a changed front grille, along with Chrysler logo located inside and outside.

2010 Chrysler Delta Concept Cars at the Detroit Auto Show

As a strange by product of the Chrysler/Fiat tie-in, a Lancia Delta wearing Chrysler badges appeared at the Detroit Auto Show’s Chrysler exhibit. There was no press release about the car. What’s more, Chrysler spokesmen seemed as surprised as we were. Let’s assume this was merely an exercise to see how the public would react.

Lancia debuted the new Delta, and this Chrysler concept cars apparently exists to demonstrate to the public that Chrysler now has foreign fingers in its pie. Powertrain? No details available, although twin exhaust tips in the rear suggest it has an engine. In Europe, the Delta is available with a choice of five powerplants; gasoline units are 1.4- and 1.8-liter turbo fours and there are also 1.6-, 1.9-, and 2.0-liter diesel inline-fours. Brembo brakes do this car’s stopping, and it wears 225/45-17 Goodyear Excellence rubber.

The only difference between this and the Delta sold in Russia, Turkey and the U.K. is the grille and Chrysler's name on the back end. Surprisingly, the exterior design fits well within the current state of Chrysler products and easily outshines most of what's on dealer lots right now. The interior looks a little disjointed for American tastes, however.

While there are a number of engines for the Delta overseas, it would likely get one of the new four- or six-cylinder engines Chrysler unveiled last week.

Although Chrysler Delta will not be sold too soon on the market in the United States of America, it exemplifies the changes that take place in the ranges of the two manufacturers in the alliance. We can expect the Dodge models to receive the logo of Alfa Romeo when Dodge will be sold in the US, and Dodge models receive similar treatment in Europe.

2010 Chrysler Delta Concept Cars apparently exist to demonstrate to the public that Chrysler now has foreign fingers in its pie. Although twin exhaust tips in the rear suggest it has an engine. In Europe, the Delta is available with a choice of five powerplants. Chrysler could learn from the Delta’s sumptuous interior. Tan leather seats are trimmed with fat black piping and the black leather covered dash is stitched with contrasting tan thread to match the seats.

Chrysler could learn from the Delta’s sumptuous interior. Tan leather seats are trimmed with fat black piping, and the black leather-covered dash is stitched with contrasting tan thread to match the seats. A panoramic full-length glass roof, navigation system, and automatic climate control attest to the luxurious trappings available on the car in Europe. 

Although the interior looks like a lovely place to pass the miles, we think the car just looks awkward, with more of a goofy French style than the sensuous shapes we expect from Italians.

2011 New Chrysler Nassau Concept Cars will be launched later this year

According to U.S. sources the 2011 Chrysler Nassau will replace the Sebring as the next generation model (Chrysler Nassau concept cars pictured). The 2011 Chrysler Nassau will be the company's new mid-size sedan and will come on the market later this year. However, the 2011 Chrysler Nassau was not officially confirmed, nor denied for that matter. Although this name was used by the company for a 2007 concept cars , we should not expect the new 2011 Chrysler Nassau to look much like that concept.

2011 New Chrysler Nassau Concept Cars

The Chrysler designers have been working on completely new interior for the 2011 Chrysler Nassau and Dodge Avenger. The exterior will look substantially different. The 2011 Chrysler Nassau will offer the choice of two engines - 2.4-liter four-cylinder engine or a V6 Pentastar unit produced at Chrysler Trenton South engine plant.

Chrysler’s Sebring was never really anywhere near its competitors as far as its performance were concerned, which is why Chrysler has decided to make a fresh start with the car. And they have begun by giving the car a new name – Nassau – which is slated to hit the market in the last quarter of 2010 when it will replace the current Sebring.

The Nassau name plate was first seen on a concept car Chrysler had revealed in 2007. Chrysler also has a range of motorhomes available that are undergoing some modifications since earlier editions. Unlike the Sebring, motorhomes made by Chrysler are much larger and can accommodate more people in comfort. This type of vehicle is probably more suited to long distance travel and touring trips where motorhome hire is also an option for the vehicle.

The Chrysler’s Sebring is not being seen in good light of late, something that can be attributed to the sedan relying heavily on fleet and rental fleet sales with the majority of the grouse coming from the car’s interior quality which many claim is way behind what its competitors have on offer. Chrysler is of the opinion that the name ‘Sebring’ does not carry enough brand equity nor has any positive history associated with it that would make retaining the name for their all-new sedan really worthwhile.

“Chrysler bought the Nassau name when they came out with the concept, so it makes sense they would use it,” said Jim Hall, a consultant at a firm that is into advising automakers on future vehicles.

Another Chrysler Group model scheduled for replacement in the next 12 months is the Dodge Avenger. While little has been revealed on the new model (or whether it too will get a new name), previous reports suggested it would debut on a rear-wheel-drive platform as a sportier alternative to the Sebring.

That’s not all for there will also be an all-new Dodge Avenger to join the Nassau and is slated for a 2011 release with both the cars donning new interiors that Chrysler claims will match up to the best. The exteriors of the vehicles too will be a lot different so as to make them stand out as fresh new vehicles.

The 2011 Chrysler Nassau will be launched later this year. And The 2011 Chrysler Nassau price will be announced at a later date.

2011 New Chrysler Nassau Concept Cars will be launched later this year

According to U.S. sources the 2011 Chrysler Nassau will replace the Sebring as the next generation model (Chrysler Nassau concept cars pictured). The 2011 Chrysler Nassau will be the company's new mid-size sedan and will come on the market later this year. However, the 2011 Chrysler Nassau was not officially confirmed, nor denied for that matter. Although this name was used by the company for a 2007 concept cars , we should not expect the new 2011 Chrysler Nassau to look much like that concept.

2011 New Chrysler Nassau Concept Cars

The Chrysler designers have been working on completely new interior for the 2011 Chrysler Nassau and Dodge Avenger. The exterior will look substantially different. The 2011 Chrysler Nassau will offer the choice of two engines - 2.4-liter four-cylinder engine or a V6 Pentastar unit produced at Chrysler Trenton South engine plant.

Chrysler’s Sebring was never really anywhere near its competitors as far as its performance were concerned, which is why Chrysler has decided to make a fresh start with the car. And they have begun by giving the car a new name – Nassau – which is slated to hit the market in the last quarter of 2010 when it will replace the current Sebring.

The Nassau name plate was first seen on a concept car Chrysler had revealed in 2007. Chrysler also has a range of motorhomes available that are undergoing some modifications since earlier editions. Unlike the Sebring, motorhomes made by Chrysler are much larger and can accommodate more people in comfort. This type of vehicle is probably more suited to long distance travel and touring trips where motorhome hire is also an option for the vehicle.

The Chrysler’s Sebring is not being seen in good light of late, something that can be attributed to the sedan relying heavily on fleet and rental fleet sales with the majority of the grouse coming from the car’s interior quality which many claim is way behind what its competitors have on offer. Chrysler is of the opinion that the name ‘Sebring’ does not carry enough brand equity nor has any positive history associated with it that would make retaining the name for their all-new sedan really worthwhile.

“Chrysler bought the Nassau name when they came out with the concept, so it makes sense they would use it,” said Jim Hall, a consultant at a firm that is into advising automakers on future vehicles.

Another Chrysler Group model scheduled for replacement in the next 12 months is the Dodge Avenger. While little has been revealed on the new model (or whether it too will get a new name), previous reports suggested it would debut on a rear-wheel-drive platform as a sportier alternative to the Sebring.

That’s not all for there will also be an all-new Dodge Avenger to join the Nassau and is slated for a 2011 release with both the cars donning new interiors that Chrysler claims will match up to the best. The exteriors of the vehicles too will be a lot different so as to make them stand out as fresh new vehicles.

The 2011 Chrysler Nassau will be launched later this year. And The 2011 Chrysler Nassau price will be announced at a later date.

Chrysler to develop new Fiat 500 electric vehicle for U.S.

Chrysler announced today that it will build an all-electric vehicle using the Fiat 500 platform. For those who don’t know the Fiat 500EV made its debut back in January at the 2010 Detroit Auto Show and the manufacturer promises that the vehicle will demonstrate the immediate benefits of the alliance between Chrysler Group and the Fiat Group.

The US edition will undergo further development at Chrysler hq in Auburn Hills, Michigan. "The alliance with Fiat presented new opportunities to merge Chrysler Group engineering knowledge with new platforms and the Fiat 500EV is an outstanding example of our efforts," said Chrysler engineering executive Scott Kunselman.

“The Fiat 500 is a small, lightweight platform perfect for integrating electric-vehicle technology.” added the same Kunselman.

Pricing for the Fiat 500EV will be “competitive with similar electric vehicles in the market.” Most automakers have all-electric vehicles planned over the next few years.





Press Release

Chrysler Group LLC to Develop New Fiat 500 Electric Vehicle for the
United States

• New Fiat 500EV demonstrates benefits of Chrysler Group and Fiat
  Group alliance
• Zero-emission Fiat 500EV provides an environmentally friendly,
  clean, quiet driving experience freeing customers from escalating fuel
  costs and costly oil changes
• Department of Energy provides up to $48 million grant toward test
  fleet of 140 Ram Plug-in Hybrid Electric Vehicles
• PHEV technology to improve fuel economy up to 65 percent with up to
  20 mile electric-only driving range

Chrysler Group LLC today announced its plans to engineer and produce a
pure electric vehicle using the Fiat 500 platform. Shown earlier this year
at the 2010 North American International Auto Show, the Fiat 500EV
demonstrates the immediate benefits of the alliance between Chrysler Group
and the Fiat Group as well as the speed at which the two companies can work
together on advanced vehicle programs.

"The alliance with Fiat presented new opportunities to merge Chrysler
Group engineering knowledge with new platforms and the Fiat 500EV is an
outstanding example of our efforts," said Scott Kunselman, Senior Vice
President Engineering-Chrysler Group LLC. "The Fiat 500 is a small,
lightweight platform perfect for integrating electric-vehicle technology."

The Fiat 500EV powertrain is comprised of three main systems; high power
electric powertrain module, advance lithium ion battery, and an EV control
unit to manage power flows. Beginning in 2012, Chrysler Group will
manufacture the Fiat 500EV for the United States market. All powertrain
engineering and vehicle development will take place at Chrysler Group
headquarters in Auburn Hills, Mich. Pricing will be announced closer to
launch, but will be competitive with similar electric vehicles in the
market.

Chrysler Group is the vehicle electrification center of competence for
both Chrysler Group and Fiat Group. The company is exploring ways to promote
zero-emission transportation and the development of an electric-vehicle
charging infrastructure through partnerships to be announced in the future.

Last year Chrysler Group announced the company's intention to build the
Fiat 500 with a combustion engine for North America. The vehicle will debut
in late 2010.

Ram Plug-in Hybrid Electric Vehicle (PHEV)

Chrysler Group has been selected for a U.S. Department of Energy (DOE) grant
of up to $48 million as part of a $2.4 billion American Recovery and
Reinvestment Act DOE Vehicle Electrification program. Chrysler Group is
planning to build a total of 140 Ram PHEVs for a three-year demonstration
project that includes various geographic and climatic locations across the
United States.

"This initiative represents how government, automotive industry,
suppliers and key partners are reaching common goals and demonstrates how
rapidly this type of advanced technology can be brought to market," said
Paolo Ferrero, Senior Vice President-Powertrain, Chrysler Group LLC.
"DOE-support for domestic advanced technology is an important enabler for
Chrysler Group and its key suppliers in order to understand and test
customer acceptance and the capability of PHEV systems in a variety of
real-world conditions."

The Ram PHEV features Chrysler Group's 5.7-liter HEMI V-8 with a two mode
hybrid transmission and a 12KwHr lithium ion battery. The vehicle is capable
of up to 20 miles of zero-emission, pure-electric range without the need for
gasoline. An overall fuel economy improvement more than 65 percent is
expected for average drive cycles. Chrysler Group has partnered with
Electrovaya Inc. to supply the advanced lithium Ion batteries for the Ram
PHEV test fleet.

The DOE grant will expedite the development of vehicle-electrification
technology. More than 21 Chrysler Group partners across the U.S., including
utility companies, government agencies and Universities will independently
test the Ram PHEV and provide valuable data for the advancement of the
technology.

In 2008, Chrysler Group announced the company's intention to bring a Ram
Hybrid Electric Vehicle (HEV) to market. After closely evaluating the
response to hybrid pickups in the marketplace, the company could not
formulate an appropriate business case and has decided to cancel development
work on the 2011 Ram HEV.

Chrysler Group's alliance with Fiat Group brings new platforms and
technologies that allow the company to create an improved long-term product
strategy with greater fuel efficiency and reduced emissions. Chrysler
Group's five-year plan has an uncompromising product schedule, including a
progressive vehicle electrification strategy.

Chrysler kicks off prolongation of Pentastar V6 engine, before wellknown as “Legendarybird”

Chrysler launched production of its all-new 3.6-liter 'Pentastar' (Phoenix) V-6 engine today at its Trenton, Michigan South Engine Plant. Chrysler first introduced the engine at the New York Auto Show last year, announcing that it would launch in the all-new 2011 Jeep Grand Cherokee - a vehicle expected to hit showrooms in the second quarter of 2010. The engine will ultimately replace seven different V-6 engines currently in the Chrysler Group lineup, resulting in less-costly and more efficient engine production.

Design this all aluminum, 60-degree, dual-overhead cam (with non-static valve timing) powerplant to see lots of use in a near-term destiny – Chrysler boasts that the Pentastar V6 will replace 7 stream V6 engines. In the brand-new Grand Cherokee, a Pentastar will put out 280 horsepower The 22-percent enlarge during 6,400 rpm and 260 pound-feet of torque (an 11-percent alleviation at 4,800 rpm.

Just as importantly, Chrysler tells us that the newborn engine module be 11 proportionality more render economical than the organisation it replaces, and it module separate on either lawful 87-octane fuel or E85. This kinsfolk of engines equal a $730 meg investment, and the 822,000-square-foot Trenton artefact module be healthy to display more than 400,000 engines per year.




Press Release

Chrysler Group LLC Celebrates Production Launch of Pentastar V-6 Engine
at All-new Trenton, Mich., Facility

• Governor, Wayne County Executive, Mayor and UAW join employees for
  celebration


• All-new 3.6-liter Pentastar V-6 to replace seven current V-6 engines,
  resulting in flexibility, efficient operations and significant cost savings
  to the company


• Michigan becomes center of Chrysler Group's powertrain offensive


• Nearly $1 billion in powertrain investments in Michigan since 2007

Auburn Hills, Mich., Mar 19, 2010 - With Michigan Governor Jennifer M. Granholm
and other local officials in attendance, Chrysler Group LLC celebrated the
launch of its all-new Pentastar V-6 engine at an event today at the Trenton
(Mich.) South Engine Plant (TSEP).

In addition to the Governor, Wayne County Executive Robert Ficano, Trenton Mayor
Gerald Brown, UAW Chrysler Department Assistant Director Tim Bressler and other
local officials joined Chrysler Group executives and Trenton South employees in
recognizing the importance of the plant and the new engine in the future success
of the Company.

"The Pentastar engine is a cornerstone of Chrysler's efforts to re-invent its
business model with strong, brand-focused, world-class quality products," said
Scott Garberding, Head of Manufacturing, Chrysler Group LLC. "The new Trenton
South plant demonstrates the Chrysler Group's commitment to supporting economic
development in Michigan. It also acknowledges the support of the International
UAW and our outstanding workforce for helping us create an engine plant that can
compete with the best in the world. Their efforts will help establish Trenton
South as a premier manufacturer of fuel-efficient engines in support of the
Company's future growth."

Chrysler Group's all-new flex-fuel Pentastar V-6 is the most advanced V-6 engine
in the company's history. This new line of V-6 engines will contribute to an
overall fuel-efficiency improvement of more than 25 percent across the Chrysler,
Ram Truck, Jeep® and Dodge product lineup. More refined and fuel-efficient, the
Pentastar engine will ultimately replace seven current Chrysler Group V-6
engines and utilize advanced technologies from the Fiat alliance such as
Multiair, direct-injection and turbocharging.

The first application of this engine will be in the all-new 2011 Jeep Grand
Cherokee, due out in the second quarter this year.

The start of production at Trenton South represents one piece of the Chrysler
Group's revamped powertrain strategy. In December 2009, the Company announced
that it would invest $179 million in its Global Engine Manufacturing Alliance (GEMA)
plant in Dundee, Mich., to produce the 1.4-liter, 16-valve Fully Integrated
Robotized Engine (FIRE). Together, these two plants - with a combined investment
of nearly $1 billion - position Michigan at the center of Chrysler Group's
powertrain offensive.

"With the start of production here in Trenton and the recently announced
investment in Dundee, Chrysler Group has helped affirm Michigan's position as
the world's leader in automotive innovation and excellence," said Gov. Granholm.
"These projects further demonstrate that Michigan has the competitive business
climate, infrastructure and talented workforce to compete in the global
marketplace."

Chrysler Group announced a $730 million investment in the Pentastar program when
it broke ground on the all-new 822,000-square-foot facility in May 2007. The
plant will have an annual manufacturing capacity of more than 400,000 engines.

"Three years ago, Chrysler Group demonstrated its confidence in its workforce by
investing in its powertrain operations," said the UAW's Bressler. "Today, the
UAW members at Trenton are excited to participate in building the next
generation of high quality, fuel-efficient engines for Chrysler's great lineup
of vehicles and thereby, ensuring the Company's future success."

Dodge Ram Power Wagon Spy

We just told you that that Chrysler will be launching four new "Moparized" vehicles later this month, and our spies have already caught one of these new vehicles – the Dodge Ram Power Wagon – on the streets of southeast Michigan.


Unlike the Power Wagon that's just now hitting dealers, this is a totally unique package, featuring a single-cab configuration with a short, style-side bed. The huge off-road tires and exaggerated wheel arches lead us to believe that this is Chrysler's answer to the Ford F-150 SVT Raptor (if only in concept form), and our spies tell us that this prototype "made hair-raising sounds" as it drove by, leading us to believe that the 383-horsepower Hemi V8 is underhood.


We can't wait to see the production version on March 27 at the 44th Annual Easter Jeep Safari in Moab, Utah. If these spy shots are anything to go off of, it looks like it'll be serious fun for desert storming.



More Photos

Top Luxury Cars - The 2009 Chrysler Firepower

The 2009 Chrysler Firepower is a superb sports car with a top sped of 175 mph. This car happens to be the very first model from the house of Chrysler, which is featured with the powerhouse V8 engine. The is equipped with the hemispherical shape combustion chamber. The new 2008 and 2009 Chrysler Firepower models come with the front and longitudinal layout. The curb weight of the vehicle is about 3380 pounds.

The engine used in all the variants of the 2009 Firepower is the V8 OHV with the HEMI cast iron set up. The length of the model is measured to be about 172.6 inches, while the width and height of the new model is about 73.2 inches and 47.7 inches respectively.

The 2008 model comes with the ground clearance of 5.1 inches with the wheelbase of 98.8 inches, while the overhang for the front and rear sides are measured about 34.1 inches and 39.6 inches respectively. This two-seat coupe also comes with a 6.1 liter 425 bhp advanced engine.

The 2009 Firepower has been manufactured with a fine artistic touch, but still the aggressiveness of the vehicle is well dominated by its stylish looks. Its style can be definitely compared with the Dodge Viper, and the Firepower is equipped with the Cental High Mounted Stop Lamp or CHMSL elegant touch, which is mounted on its roof as the satellite antenna.

In addition to its looks and design, the vehicle has all the quality in terms of the high speed and acceleration to be rated as a super car.

Jet-set-go, download the latest Chrysler Firepower Wallpapers Here

Here's one of the biggest online collections of the Chrysler Car Wallpapers
Article Source: http://EzineArticles.com/?expert=Geof_Ryan

Top Luxury Cars - Cars Hurt Most by the Recession

This are the 7 nameplates have lost the most market share so far in 2009, compared to 2008.

1. Chrysler
2. Dodge
3. Chevrolet
4. Saturn
5. Toyota
6. Scion
7. Suzuki

JEEP® Brand broadens vehicle lineup with a new model

Available second quarter 2010, Jeep Wrangler Mountain edition boasts rugged outdoor theme, with 32-inch tyres and unique wheel, grill and bumper appliques.

Jeep Wrangler Mountain

Further expanding the iconic Wrangler brand’s reach, Jeep delivers another high-impact, limited-edition model with the Jeep Wrangler Mountain edition.

The Jeep Wrangler Mountain edition is based on the Wrangler Sport S package, and is available in Wrangler Unlimited 4x4 models.

Exterior features include a unique “Mountain” decal on the hood with latitude and longitude coordinates that represent an actual location relating to the “Mountain” theme of the vehicle; grill and bumper appliques; tabular side steps; 32-inch tyres; black tail lamp guards and a fuel-filler door from Mopar.

Available exterior colours include Rescue Green Metallic Clear Coat, Brilliant Black Crystal Pearl Coat and Deep Water Blue Pearl Coat.

Interior features include an embossed seat insert with embroidered “Mountain logo”, and anodized graphite heating, ventilation and air conditioning (HVAC) rings.

The Jeep Wrangler Mountain option package will be available in South Africa.

- Available second quarter 2010, Jeep Wrangler Mountain edition boasts rugged outdoor theme, with 32-inch tyres and unique wheel, grill and bumper appliques.

Jeep Wrangler Mountain

Further expanding the iconic Wrangler brand’s reach, Jeep delivers another high-impact, limited-edition model with the Jeep Wrangler Mountain edition.

The Jeep Wrangler Mountain edition is based on the Wrangler Sport S package, and is available in Wrangler Unlimited 4x4 models.

Exterior features include a unique “Mountain” decal on the hood with latitude and longitude coordinates that represent an actual location relating to the “Mountain” theme of the vehicle; grill and bumper appliques; tabular side steps; 32-inch tyres; black tail lamp guards and a fuel-filler door from Mopar.

Available exterior colours include Rescue Green Metallic Clear Coat, Brilliant Black Crystal Pearl Coat and Deep Water Blue Pearl Coat.

Interior features include an embossed seat insert with embroidered “Mountain logo”, and anodized graphite heating, ventilation and air conditioning (HVAC) rings.

The Jeep Wrangler Mountain option package will be available in South Africa.

Source: Chrysler

Chrysler 300C Receives Minor Updates for 2010MY [UK]

Chrysler UK Ltd has announced a new model line-up of its highly popular 300C range, designed to give buyers exceptional value for money. The new executive model line-up and prices take effect from Friday 1st January 2010.

Chrysler has researched exactly what customers want in today’s changing market, and the new range will focus more closely on these requirements.

With its refined interior, premium technology features and unmistakable design, the Chrysler 300C saloon continues to offer unmatched style, performance and excitement in the hugely competitive E-segment, plus it now offers very attractive and affordable pricing.


The new 2010 300C range will now offer four derivatives, the 300C SE, SR and SRT comes with an automatic gearbox and a 3.0-litre V6 diesel engine, while the SRT-8 is coupled with a mighty 6.1-litre V8 HEMI® petrol engine.

The new entry-level diesel model, 300C SE, is available from just £23,995 on the road, and offers a very high level of standard equipment including leather trimmed seats, ESP, ABS, front, rear and side-curtain airbags, heated front seats, dual zone climate control, LED ambient lighting, front fog lamps, parking sensors (front and rear).

On the exterior, Xenon headlamps and rain-sensing windscreen wipers are also standard along with 18” aluminium wheels.

The in-car entertainment system features AM/FM radio with CD player and MP3 capability and a six speaker Boston Acoustics® sound system.

The fuel efficient and highly-refined 3.0 litre common-rail diesel (CRD) engine offers maximum efficiency, providing exceptional power of 215 bhp at 4,000 rpm and 376 lb.-ft of torque at 1,600 rpm. Top speed is 143 mph and the 300C can reach 0-62.5 mph in 8.7 seconds.


The 300C SR is priced at £24,995. In addition to the SE specification, SR models feature auto-dimming rear view mirror, upgraded Boston Acoustics® sound system including subwoofer and uconnect® gps satellite navigation system, uconnect® phone with voice recognition, a hands-free communication system using Bluetooth technology. Optional extras on the SR are the power sunroof costing £750 and heated rear seats costing £250.

The 300C SRT priced at £27,995, offers in addition to the SR models a mesh grille with chrome surround, body coloured door mirrors and door handles, wheel arch extensions, 20 inch aluminium wheels, leather and suede trimmed sports seats and carbon fibre interior details.
In a segment dominated by prestigious German marques; Audi, BMW and Mercedes-Benz, the 300C is able to compete aggressively on price and standard equipment levels.

The top-of-the range performance model, the SRT-8 costs £41,795. Its legendary 6.1 V-8 HEMI® petrol engine generates 425 bhp of power with 420 lb -ft of torque. The rear-wheel drive Chrysler 300C SRT-8 is capable of impressive performance times - 0 to 62.5 mph in just 5.0 seconds, standing start quarter-mile time in the high 13-second range, a top of speed of 165 mph and 0-100-0 in the mid 16-seconds.


Extra SRT-8 specification includes high performance Brembo® calipers, power sunroof, performance tuned steering and suspension making the SRT-8 the ultimate Chrysler 300C and the most affordable performance car in the market place today.

Chrysler UK Ltd Managing Director, Federico Goretti, said: “The new 2010 300C range will assist us in gaining a competitive advantage in a fiercely contested segment of the market.
“ With an entry level price of under £24,000, Chrysler is also attracting customers from the D-segment who are looking for a car that stands out from the crowd and comes highly equipped. Customers can now get all the features and benefits of a 300C for less than a mid-range D-segment car.

“The Chrysler 300C remains a great looking, well equipped car and now offers an even more desirable package of power, performance and style combined with attractive and extremely competitive pricing.”
Source:Chrysler UK